AXIAL INLINE FANS
Lti-Axial flow-fans are specially manufactured for all applications and mounting positions in case sizes 315 up to 1600 mm diameter. The performance range is from 1000 up to 360000 reh on air volume. at static pressure up to 1500 Pa. Higher pressures are possible on multi-stage versions, contra-rotating. The curves show in this catalogue are for smoke extract version up to 300 C only For F 400 C. please approvach Lti’s staff for assistant.
Lti-Axial flow-fans are specially manufactured for all applications and mounting positions in case sizes 315 up to 1600 mm diameter. The performance range is from 1000 up to 360000 m³/h on air volume, at static pressure up to 1500 Pa. Higher pressures are possible on multi-stage versions, contra-rotating. The curves show in this catalogue are for smoke extract version up to 300 C only. For F 400 C, please approvach Lti’s staff for assistant
AXIAL SMOKE FANS
Lti-Axial flow-fans are specially manufactured for all applications and mounting positions in case sizes 315 up to 1600 mm diameter. The performance range is from 1000 up to 360000 reh on air volume. at static pressure up to 1500 Pa. Higher pressures are possible on multi-stage versions, contra-rotating. The curves show in this catalogue are for smoke extract version up to 300 C only For F 400 C. please approvach Lti’s staff for assistant
Lti-Axial flow-fans are specially manufactured for all applications and mounting positions in case sizes 315 up to 1600 mm diameter. The performance range is from 1000 up to 360000 m³/h on air volume, at static pressure up to 1500 Pa. Higher pressures are possible on multi-stage versions, contra-rotating. The curves show in this catalogue are for smoke extract version up to 300 C only. For F 400 C, please approvach Lti’s staff for assistant
AXIAL WALL MOUNTED FANS
Lti axial wall and mini ducted fans have been developed for effective supply and exhaust systems. Ranges LR and LW are suitable and best use in low-pressure systems. The LTI impellers are of sheet steel and profi led for optimal efficiency and with powder coating finish. The casing are of galvanized steel and rigid construction.
A comprehensive range of accessories is available. The LTI LR axial fan casings are designed for duct mounting, the AW fan casings for direct wall mounting. From sizes 200 up to 1000 mm, LW/LR range are all equipped with german designed external rotor motor. This design gives minimum air turbulence and lower noise.
BIFURCATED FANS
Bifurcated axial fans are used in conditions where it is significant that the motor is kept out of the airstream due to the type or temperature of the gases/fumes involved. Higher temperature applications are also available
CHEMICAL RESISTANCE FAN
Single block strong high density UV treated and recyclable polypropylene (PPH) with no welded joint. Reversible and rotable to any the 8 standard discharge positions by 45° increments. All fan mounting hardware in stainless steel.
Forward curved centrifugal type impeller made, of injection molded PPH. Fan wheel supplied with hub cap constructed of PPH. Wheels electronically and dynamically balanced to ISO 1940.
DOMESTIC FAN
PP Plastic body
elegant design and lower noise
Silicon steel motor and 100% pure copper winding
Built-in thermo-cut-off protects the motor
Top-grade motors ensure long life
Fantastic grille design made from ABS covers
DUCTED INLINE FANS
The LTi centrifugal In-line fans are the result of long experience in the development and manufacturing of ventilation systems. The partnership between highly motivated LTi employees and world known component suppliers; guarantees quality products on the highest technical level and precise reliability.
LTi Mix flow In-line Duct fans are the result of long experience in the development and manufacturing of ventilation systems. The partnership between highly motivated LTi employees and world known component suppliers; guarantees quality products on the highest technical level and precise reliability.
JET FANS
For normal ventilation and smoke extraction in case of fire F300 (300°C/120 min.).
• Aerodynamical centrifugal impeller for maximum thrust and with low sound level .
• For normal ventilation motors are IP55, insulation class F, For smoke extraction motors are IP54, insulation class H.
• Suitable for low ceiling heights.
• Galvanized steel casing.
• Deflectors for adjusting flow.
• Certified in accordance to BS 7346:Part 2
• Dual use: For daily ventilation and smoke extraction in case of fire F300 (300°C/120 min.).
• Aerodynamical impellers for maximum thrust and with low sound level.
• Motors IP54, insulation class H (smoke extract); motors IP55, insulation class F (CO-exhaust).
• Casing manufactured from galvanized steel.
• Removable fan module also after installation for easy maintenance.
• Certified to BS 7346: Part 2/EN 12101-3
SWSI CABINET FANS
The Lti Rectangular Cabinet Fan units are the result of long experience in the development and manufacturing of ventilation systems. The partnership between highly motivated Lti employees and world-known component suppliers guarantees quality products on the highest technical level and precise reliability.
MBF range of backward curve centrifugal fan give optimum performance and higher efficiency yet low operation noise.
It is developed & tested with German technology with non-overloading characteristics. This set of ventilation fans is widely used in the market not only for the performance but also simple & easy installation thanks to its design.
UTILITY FANS
LTI Ventilatoren certifies that the BSE series shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.
BSE SERIES PRODUCT OVERVIEW
The BSE series are a series of single inlet backward curve centrifugal fan with non-overloading characteristics. Developed with the latest available German technology, there are 12 models
available for selection. These ventilation fans are efficient, have low noise operation and are green for the environment. They are suitable for use in a wide variety of ventilation applications.